User guide

Chapter 3 Command Line Interface
Authorization and Command Levels (Hierarchy)
SCE 1000 2xGBE Release 2.0.10 User Guide
3-10 OL-7117-02
Exiting from any configuration mode and revert to the previous mode is done in the same manner,
as in the following procedure.
To exit from the Global Configuration Mode:
Step 1 At the SCE 1000(config)# prompt, type exit, and press Enter.
The appropriate prompt for the previous level appears.
EXAMPLE:
The following example shows the system response when you exit the Interface Configuration
mode.
SCE 1000(config if)#exit
SCE 1000(config)#
Prompt Indications
The on-screen prompt indicates your authorization level, your command hierarchy level, and the
assigned host name. The structure of the prompt is:
<hostname(mode-indication)level-indication>
Authorization levels are indicated as follows:
This prompt... Indicates this...
>
indicates User level
#
indicates Admin level
#>
indicates Root level