User guide

Appendix A
Privileged Exec Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 A-83
• redundancy
• link-bypass mode when not operational
• administrative status after abnormal reboot
For a complete description of the command, see System Configuration (on page 4-26).
Authorization admin
Mode Privileged EXEC
P
ARAMETERS
The setup command does not include parameters in the usual sense of the word. However, the
setup utility questions prompt for many global configuration parameters. Following is a table
listing all parameters for which values may be requested by the setup dialog.
The following table lists all the parameter values that are necessary to complete the initial
configuration. It is recommended that you obtain all these values before beginning the setup.
E
XAMPLE:
The following example runs the setup utility.
SCE 1000#setup
--- System Configuration Dialog ---
At any point you may enter a question mark ‘?’ followed by ‘Enter’ for help.
Use ctrl-C to abort configuration dialog at any prompt.
Use ctrl-Z to jump to the end of the configuration dialog at any prompt.
Default settings are in square brackets ‘[]’.
Would you like to continue with the System Configuration Dialog? [yes/no]: y