User guide

Appendix A
LineCard Interface Configuration Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
A-42 OL-7117-02
[no] silent
Disables the LineCard from reporting events. Use the [no] form of this command if you want the
LineCard to send reports.
Default No silent
Authorization admin
Mode LineCard Interface Configuration
E
XAMPLE:
The following example changes the LineCard state to silent.
SCE 1000(config if)#silent
SCE 1000(config if)#
pqi upgrade file filename [options options]
Upgrades the application using the specified pqi file and the upgrade options specified (if any).
This may take up to 5 minutes
Authorization admin
Mode LineCard Interface Configuration
P
ARAMETERS
filename The filename of the pqi application file to be used for the upgrade.
options The desired upgrade options. Use the show pqi file command to display
the available options.
U
SAGE GUIDELINES
• A given pqi upgrade file is suitable for upgrading only from specific previously installed pqi
files. The upgrade procedure checks that an upgrade is possible from the currently installed
pqi file. The upgrade procedure will be stopped with an error message if the upgrade is not
possible.
E
XAMPLE:
The following example upgrades the Subscriber Manager using the anr100155.pqi file. No
options are specified.
SCE 1000 (config if)# pqi upgrade file anr100155.pqi