User guide

Appendix A
LineCard Interface Configuration Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 A-39
[no] link failure-reflection [on-all-ports]
Enables/disables the link failure reflection.
Default Disabled
Authorization admin
Mode LineCard Interface Configuration
U
SAGE GUIDELINES
• Use the on-all-ports keyword to enable reflection of a link failure to all ports
• Use the [no] form of this command to disable failure reflection (the on-all-ports
keyword is not used in the [no] form of the command).
E
XAMPLE:
SCE 1000(config if)#link failure-reflection on-all-ports
SCE 1000(config if)#
link mode
Configures the link mode. The link mode allows the user to enforce the specified behavior on the
link. This may be useful during installation and for debugging the network.
Authorization admin
Mode LineCard Interface Configuration
P
ARAMETERS
Mode Forwarding
Bypass
Cutoff
Sniffing
E
XAMPLE:
The following example configures "sniffing" as the link mode.
SCE 1000(config if)# link mode sniffing