User guide

Appendix A
Global Configuration Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 A-21
ip rpc-adapter port port-number
Defines the RPC adapter port.
Authorization admin
Mode Global Configuration
P
ARAMETERS
port-number The number of the port assigned to the RPC adapter.
E
XAMPLE:
The following example shows how to configure the RPC interface, specifying 1444 as the RPC
adapter port.
SCE 1000(config)#ip rpc-adapter
SCE 1000(config)#ip rpc-adapter port 1444
default ip rpc-adapter port
Resets the RPC adapter port assignment to the default port: 14374.
Authorization admin
Mode Global Configuration
E
XAMPLE:
The following example shows how reset the RPC adapter port.
SCE 1000(config)# default ip rpc-adapter port
line vty start-number [end-number]
Enters Line Configuration Mode for Telnet lines, configuring all Telnet lines.
Authorization admin
Mode Global Configuration
P
ARAMETERS
start-number A number in the range 0-4. The actual number supplied does not
matter. All telnet lines will be configured by this command.
end-number A number in the range 0-4. The actual number supplied does not
matter. All telnet lines will be configured by this command.
U
SAGE GUIDELINES
• The system prompt changes to reflect the Line Configuration mode. To return to Global
Configuration Mode, type exit.
E
XAMPLE:
The following example enters the Line Configuration Mode for all lines.
SCE 1000(config)#line vty 0
SCE 1000(config-line)#