User guide

Appendix A
Global Configuration Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
A-10 OL-7117-02
[no] clock timezone zone hours [minutes]
Sets the time zone. Use the [no] version of this command to remove current time zone setting.
The purpose of setting the time zone is that the system can correctly interpret time stamps data
coming from systems located in other time zones.
Default GMT (hours=0)
Authorization admin
Mode Global Configuration
P
ARAMETERS
zone The name of the time zone to be displayed.
hours The hours offset from GMT (UTC). This must be an integer in the range
–23 to 23.
minutes The minutes offset from GMT (UTC). This must be an integer in the range of
0 to 59. Use this parameter to specify an additional offset in minutes
when the offset is not measured in whole hours.
E
XAMPLE:
The following example sets the time zone to Pacific Standard Time with an offset of 10 hours
behind GMT.
SCE 1000(config)#clock timezone PST –10
SCE 1000(config)#