User guide

Appendix A
Exec Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
A-6 OL-7117-02
Exec Mode Commands
disable [level]
Moves the user from a higher level of authorization to a lower user level.
Authorization user
Mode Exec
P
ARAMETERS
level User authorization level (0, 10, 15) as specified in Login and User Levels (on
page A-3), in table Authorization Levels.
U
SAGE GUIDELINES
• Use this command with the level option to lower the user privilege level. If a level is not
specified, it defaults to User mode.
E
XAMPLE:
The following example shows exits from root to admin mode:
SCE 1000#>disable 10
SCE 1000#
enable [level]
Enables the user to access a higher authorization level.
Default admin
Authorization user
Mode Exec
P
ARAMETERS
level User authorization level (0, 10, 15) as specified in in Login and User Levels
(on page A-3), in table Authorization Levels.
U
SAGE GUIDELINES
• After entering this command, the user is prompted to enter the password before obtaining
access to Privileged Exec mode. The password is case-sensitive.
• If a level is not specified, the level defaults to the Privileged Exec mode, level 10.
E
XAMPLE:
The following example accesses the administrator authorization level. Note that the prompt
changes from SCE 1000> to SCE 1000#, indicating that the privilege is the administrator
privilege level.
SCE 1000>enable
Password:[pwd]
SCE 1000#