User guide

Chapter 10 Troubleshooting
Front Panel LEDs
SCE 1000 2xGBE Release 2.0.10 User Guide
10-4 OL-7117-02
Symptom How to look for the
specific cause
Possible Cause Resolution
Status LED is red CLI commands:
show system operation-
status
System Operation status is
Failure
Platform is in Failure
status.
Platform reload fails Warning message in the
user log file
Power-on self tests
failed
Reload the SCE
Platform. (use CLI
reload command)
If problem is not
solved, reopen the
software package.
See Software
Package Installation
(on page 10-12).
If reopening the
software package
does not solve the
problem, contact
customer support.
Abnormal boot
(watchdog timeout or
power failure)
Failure recovery is set
to “non-operational”
Reload the SCE 1000
platform
Five consecutive
abnormal boots
System stability
problem. Check user
log file, and contact
customer support for
further assistance.
Bypass LED is
continuous green
CLI Commands:
show interface LineCard
0 link-bypass
SCE 1000 Platform is
in Failure status and
configured to be in
bypass when in Failure
If platform is in
Failure status, reload
the SCE 1000
platform