User guide

Chapter 8 Managing Subscribers
Monitoring Subscribers
SCE 1000 2xGBE Release 2.0.10 User Guide
8-16 OL-7117-02
To display complete information for a specified subscriber - all values of subscriber properties
and mappings:
Step 1 From the SCE 1000# prompt, type show interface linecard 0
subscriber name ‘name’ and press Enter.
To display values of subscriber properties for a specified subscriber:
Step 1 From the SCE 1000# prompt, type show interface linecard 0
subscriber name ‘name’ properties and press Enter.
To display mappings for a specified subscriber:
Step 1 From the SCE 1000# prompt, type show interface linecard 0
subscriber name ‘name’ mappings and press Enter.
To display the OS counters for a specified subscriber:
Step 1 From the SCE 1000# prompt, type show interface linecard 0
subscriber name ‘name’ counters and press Enter.
Displaying Anonymous Subscriber Information
You can display the following information regarding the anonymous subscriber groups:
• aging (see Subscriber Aging (on page 8-18))
• currently configured anonymous groups
• currently configured subscriber templates
• configuration of a specified anonymous group
• number of subscribers in a specified anonymous group, or in all anonymous groups
Use the following commands to display anonymous subscriber information:
• show interface linecard 0 subscriber templates [index]
• show interface linecard 0 subscriber anonymous-group [all] [name
‘groupname’]