User guide

Chapter 8 Managing Subscribers
Monitoring Subscribers
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 8-11
Monitoring the Subscriber Database
Use the following commands to display statistics about the subscriber database, and to clear the
“total” and “maximum” counters.
• show interface linecard 0 subscriber db counters
• clear interface linecard 0 subscriber db counters
To display statistics about the subscriber database:
Step 1 From the SCE 1000# prompt, type show interface linecard 0
subscriber db counters and press Enter.
The following counters are displayed:
• Current number of subscribers
• Current number of introduced subscribers
• Current number of anonymous subscribers
• Current number of active subscribers (with active traffic sessions)
• Current number of subscribers with mappings
• Current number of IP mappings
• Current number of vlan mappings
• Max number of subscribers that can be introduced
• Max number of subscribers with mappings
• Max number of subscribers with mappings date / time
• Total aggregated number introduced
• Total number of aged subscribers
• Total number of pull events
• Number of traffic sessions currently assigned to the default subscriber
To clear subscriber database counters:
Step 1 From the SCE 1000# prompt, type clear interface linecard 0
subscriber db counters and press Enter.
The “total” and “maximum” counters are cleared (see list above).