User guide

Chapter 8 Managing Subscribers
Importing/Exporting Subscriber Information
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 8-7
• subscriber template import csv-file
• subscriber template export csv-file
These subscriber management commands are LineCard interface commands. Make sure that you
are in LineCard Interface command mode, (see Entering LineCard Interface Configuration Mode
"Entering LineCard Interface Configuration Mode" on page 3-8)).
Importing/Exporting Subscribers
To import subscribers from the csv subscriber file:
Step 1 From the SCE 1000(config if)# prompt, type subscriber import csv-
file filename and press Enter.
The subscriber information is imported from the specified file and the SCE
1000(config if)# prompt appears.
Imported subscriber information is added to the existing subscriber information. It does
not overwrite the existing data.
If the information in the imported file is not valid, the command will fail during the
verification process before it is actually applied.
To export subscribers to a csv subscriber file:
Step 1 From the SCE 1000(config if)# prompt, type subscriber export csv-
file filename and press Enter.
Subscriber information is exported to the specified file and the SCE 1000(config
if)# prompt appears.
Importing/Exporting Anonymous Groups
To create anonymous groups by importing anonymous subscribers from the csv file:
Step 1 From the SCE 1000(config if)# prompt, type subscriber anonymous-
group import csv-file filename and press Enter.
The anonymous subscriber information is imported from the specified file, creating
anonymous groups and the SCE 1000(config if)# prompt appears.
Imported anonymous subscriber information is added to the existing anonymous
subscriber information. It does not overwrite the existing data.