User guide

Chapter 7 Line Configuration
Configuring Traffic Rules and Counters
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 7-11
To view a specified traffic counter:
Step 1 From the SCE 1000# prompt, type show interface linecard 0 traffic-
counter name <counter-name>
EXAMPLE
The following example displays information for the traffic counter “cnt”.
SCE 1000# show interface linecard 0 traffic-counter name cnt
Counter 'cnt' value: 0 packets. Rules using it: None.
To view all existing traffic counters:
Step 1 From the SCE 1000# prompt, type show interface linecard 0 traffic-
counter all
EXAMPLE
The following example displays information for all existing traffic counters.
SCE 1000#show interface linecard 0 traffic-counter all
Counter 'cnt' value: 0 packets. Rules using it: None.
1 counters listed out of 32 available.
To reset a specified traffic counter:
Step 1 From the SCE 1000# prompt, type clear interface linecard 0 traffic-counter name
<counter-name>
To reset all existing traffic counters:
Step 1 From the SCE 1000# prompt, type clear interface linecard 0 traffic-counter all