User guide

Chapter 6 Control Configuration
Failure Recovery Mode
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 6-41
The figure below, illustrates the Cisco Enterprise MIB structure.
Figure 6-3: Service Control MIB Structure
Loading the MIB Files
The SCE proprietary MIB uses definitions that are defined in other MIBs, such as Pcube MIB
(pcube.mib), and the SNMPv2-SMI. Therefore, the order in which the MIBs are loaded is
important. To avoid errors, the MIBs must be loaded in the proper order.
To load the MIBs:
Step 1 Load the SNMPv2-SMI.
Step 2 Load the SNMPv2-TC.
Step 3 Load pcube.mib.
Step 4 Load pcubeSEMib.mib.
Failure Recovery Mode
The failure-recovery operation-mode command defines the behavior of the system
after boot resulting from failure. The system may return to operational mode, or remain not
operational.
The default value is operational.
• [no|default] failure-recovery operation-mode