User guide

Chapter 6 Control Configuration
The RDR Formatter
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 6-29
The forwarding mode is defined for the entire RDR formatter, not just one category. However, the
load balancing takes place within each category. Since the category “prepaid” goes to only one
destination, the forwarding mode is irrelevant. It is relevant, however to the “billing” category,
since it goes to two different destinations.
SCE 1000(config)# RDR-Formatter forwarding-mode simple-load-balancing
SCE 1000(config)# RDR-Formatter category-number 1 name billing
SCE 1000(config)# RDR-Formatter category-number 2 name prepaid
SCE 1000(config)# RDR-Formatter destination 10.1.1.205 port 33000 priority
40
SCE 1000(config)# no RDR-Formatter destination 10.1.1.205 port 33000
category name billing
SCE 1000(config)# RDR-Formatter destination 10.10.10.96 port 33000 category
name billing priority 90
SCE 1000(config)# RDR-Formatter destination 10.1.96.0 port 33000 category
name billing priority 80
Displaying RDR Formatter Configuration and Statistics
The system can display the complete RDR formatter configuration, or just specific parameters.
The following commands can be used to display the RDR formatter configuration and statistics:
• show RDR-formatter
• show RDR-formatter connection-status
• show RDR-formatter counters
• show RDR-formatter destination
• show RDR-formatter enabled
• show RDR-formatter forwarding-mode
• show RDR-formatter history-size
• show RDR-formatter protocol
• show RDR-formatter statistics
To display the current RDR formatter configuration:
Step 1 From the SCE 1000# prompt, type show RDR formatter.