User guide

Chapter 6 Control Configuration
The RDR Formatter
SCE 1000 2xGBE Release 2.0.10 User Guide
6-28 OL-7117-02
SCE 1000(config)# RDR-Formatter category-number 2 name prepaid
SCE 1000(config)# RDR-Formatter destination 10.1.1.205 port 33000 category
name prepaid priority 90 category number 1 priority 25
SCE 1000(config)# RDR-Formatter destination 10.1.1.206 port 33000 category
number 1 priority 80 category name prepaid priority 20
EXAMPLE 3:
This example demonstrates two methods for assigning one category to the first destination only,
while the other category uses the second destination as the primary destination, and the first
destination as a secondary destination.
SCE 1000(config)# RDR-Formatter category-number 2 name prepaid
SCE 1000(config)# RDR-Formatter destination 10.1.1.205 port 33000 category
name prepaid priority 90 category number 1 priority 10
SCE 1000(config)# RDR-Formatter destination 10.1.1.206 port 33000 category
number 1 priority 95
In the following example, all priority values seem quite high. However, it is the relative values of
priorities for a category that determine which destination is the primary destination.
SCE 1000(config)# RDR-Formatter category-number 2 name prepaid
SCE 1000(config)# RDR-Formatter destination 10.1.1.205 port 33000 priority
90
SCE 1000(config)# RDR-Formatter destination 10.1.1.206 port 33000 priority
95
SCE 1000(config)# no RDR-Formatter destination 10.1.1.206 port 33000
category name prepaid
EXAMPLE 4:
Finally, the following illustrates a more complex configuration with one category (prepaid)
assigned to one destination and the other (billing) being sent to either of the two destinations, in
simple-load-balancing mode.