User guide

Chapter 6 Control Configuration
The RDR Formatter
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 6-19
show hosts
To display current DNS settings:
Step 1 From the SCE 1000# prompt, type show hosts.
EXAMPLE:
The following example shows how to display current DNS information.
SCE 1000#show hosts
Default domain is Cisco.com
Name/address lookup uses domain service
Name servers are 10.1.1.60, 10.1.1.61
Host Address
---- -------
PC85 10.1.1.61
SCE 1000#
The RDR Formatter
The RDR formatter is used to gather the streams of events passed from the application, format the
data into Raw Data Records (RDRs), and send these RDRs to the appropriate destination(s).
There can be a maximum of four destinations for the RDRs. The system decides which
destination to send the RDRs to on the basis of three factors:
• Categories: RDRs may be divided into two categories, with each category being assigned to a
maximum of three of the defined destinations. A destination may be assigned to both
categories.
• Priority: The priority value assigned to the destination for a specific category
• Forwarding mode: the pattern in which the RDR traffic is divided between the various
destinations