User guide

Chapter 5 Configuration and Management
Rebooting and Shutting Down the SCE Platform
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 5-27
EXAMPLE:
The following example shows the commands for system shutdown.
SCE 1000#reload shutdown
You are about to shut down the system.
The only way to resume system operation after this
is to cycle the power off, and then back on.
Continue?
y
IT IS NOW SAFE TO TURN THE POWER OFF.
Note
Since the SCE 1000 SCE 1000 can recover from the power-down state only by being physically turned
off (Or cycling the power), this command can only be executed from the serial CLI console. This
limitation helps prevent situations in which a user issues this command from a Telnet sessions, and then
realizes he/she has no physical access to the SCE 1000.