Datasheet

Release Notes for Catalyst 4500 Series Software Release 7.x

OL-1983-28

Open and Resolved Caveats in Software Release 7.1(1a)

Resolved Caveats in Software Release 7.1(2)

These caveats are resolved in software release 7.1(2):

• A watchdog timer exception occurs because of an infinite loop in the cIgmpFilterTable. This

problem is resolved in software release 7.1(2). (CSCdv19932)

• The sc0 interface does not work after you configure a private VLAN. This problem is resolved in

software release 7.1(2). (CSCdv25263).

• Changing the spantree mode from PVST to MST.CAM table does not flush the table. This problem

is resolved in software release 7.1(2). (CSCdv90770)

• When you access the system through an HTTP interface, an NMP exception occurs. This problem

is resolved in software release 7.1(2). (CSCdw02887)

• VMPS does not work when a PC is moved between hubs. This problem is resolved in software

release 7.1(2). (CSCdw23807)

• vlanPortIslOperStatus returns an incorrect trunking status. This problem is resolved in software

release 7.1(2). (CSCdw24363)

• HSRP breaks when a CGMP leave is enabled. This problem is resolved in software release 7.1(2).

(CSCdw31553)

Open and Resolved Caveats in Software Release 7.1(1a)

These sections describe the open and resolved caveats in supervisor engine software release 7.1(1a):

• Open Caveats in Software Release 7.1(1a), page 49

• Resolved Caveats in Software Release 7.1(1a), page 49

Open Caveats in Software Release 7.1(1a)

These caveats are open in software release 7.1(1a):

• A Catalyst 4500 series switch running in the access layer may display loop guard-inconsistent

messages if a topology change occurs in corresponding designated switches that have a high number

of spanning tree instances. The switch recovers on its own and does not cause a network outage.

(CSCdz65842)

• A watchdog timer exception occurred because of an infinite loop in the CIGMPFilterTable.

(CSCdv19932)

Resolved Caveats in Software Release 7.1(1a)

This section describes caveats resolved in software release 7.1(1a):

• An error can occur with management protocol processing. Use this URL for further information:

http://www.cisco.com/cgi-bin/Bugtool/onebug.pl?bugid=CSCdw67458

This problem is resolved in software release 7.1(2a). (CSCdw67458)