User Manual

Configuring VPN

Configuring VPN Passthrough

Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 108

STEP 4 To import usernames and passwords from a CSV file, click Import. The

Administration > Users page is displayed. In the Import Username and Password

section, click Browse to locate the file, and click Import. See Importing User

Accounts for more information.

STEP 5 Save your user accounts.

Configuring VPN Passthrough

VPN passthrough allows VPN traffic that originates from VPN clients to pass

through the device.

To configure VPN passthrough:

STEP 1 Choose VPN > VPN Passthrough.

STEP 2 Check the Enable check box to choose the type of traffic to allow to pass through

the device.

STEP 3 Click Save.

SSL Certificate

Cisco RV130/RV130W supports certificate authentication for IPsec VPN. Secure

Socket Layer (SSL) Certificate provides data encryption and authenticate the

server prior to the SSL session being established.

To manage the SSL certificate, click VPN > SSL Certificate.

• Trusted Certificates (CA Certificate) Table

- Click Upload to direct to the Certificates page. Click Browse to select a

trusted certificate from your local drive, and click Import.

• Active Self Certificates

- Click Upload to direct to the Certificates page. Click Browse to select a

active self certificate from your local drive, and click Import.

• Self Certificate Requests