Datasheet

Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 6
Product Specifications
Table 1 gives the product specifications for the Cisco RV 120W.
Table 1. Product Specifications
Feature Description
Routing
Static routing
RIP v1 and v2
Inter-VLAN routing
Layer 2
802.1q -based VLANs
4 active VLANs (1 to 4094 range)
Network
Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent
Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Layer 2
Tunneling Protocol (L2TP)
DNS Proxy
IGMP Proxy and multicast forwarding
Dynamic Domain Name System (DynDNS, TZO)
Network Address Translation (NAT), Port Address Translation (PAT), Network Address Port
Translation (NAPT), Session Initiation Protocol Application Layer Gateway (SIP ALG), NAT traversal,
one-to-one NAT
Multiple DHCP pools
Port Management
IPv6
Dual-stack IPv4 and IPv6
Multicast Listener Discovery (MLD) for IPv6 (RFC2710)
Stateless address auto-configuration
DHCP v6
Internet Control Message Protocol (ICMP) v6
Security Access control:
IP access control lists (ACLs)
MAC-based wireless access control
Firewall:
SPI firewall
Port forwarding and triggering
DoS prevention
Software based DMZ
Content filtering:
Static URL blocking or keyword blocking
Secure management:
HTTPS
Username/password
802.1X
Port-based RADIUS authentication (Extensible Authentication Protocol [EAP], Protected EAP [PEAP])
Certificate management
X.509 v3 certificates
Certificate upload using PEM format
VPN
10 QuickVPN tunnels for remote client access
10 IPsec site-to-site tunnels for branch office connectivity
Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) encryption
Message Digest Algorithm 5 (MD5)/Secure Hash Algorithm (SHA1) authentication
Dead Peer Detection (DPD)
IPsec NAT traversal
VPN pass-through of PPTP, L2TP, IPsec
Quality of Service
802.1p port-based priority on LAN port, application-based priority on WAN port
4 queues
DiffServ support
Traffic Metering