User Manual
Table Of Contents
- Introduction
- Configuring Networking
- Configuring the Wireless Network
- Configuring the Firewall
- Configuring VPN
- Configuring Quality of Service (QoS)
- Administering Your Cisco RV110W
- Setting Password Complexity
- Configuring User Accounts
- Setting the Session Timeout Value
- Configuring Simple Network Management (SNMP)
- Using Diagnostic Tools
- Configuring Logging
- Configuring Bonjour
- Configuring Date and Time Settings
- Backing Up and Restoring the System
- Upgrading Firmware or Change the Language
- Restarting the Cisco RV110W
- Restoring the Factory Defaults
- Running the Setup Wizard
- Viewing the Cisco RV110W Status
- Using Cisco QuickVPN
- Where to Go From Here
1
Cisco RV110W Administration Guide 8
Introduction
This chapter provides information to familiarize you with the product features,
guide you through the installation process, and get started using the
browser-based Device Manager.
• Product Overview
• Getting to Know the Cisco RV110W
• Installing the Cisco RV110W
• Connecting the Equipment
• Using the Setup Wizard
• Verifying the Hardware Installation
• Connecting to Your Wireless Network
Product Overview
Thank you for choosing the Cisco Small Business RV110W Wireless-N VPN
Firewall.
The Cisco RV110W is an advanced Internet-sharing network solution for your
small business needs. It allows multiple computers in your office to share an
Internet connection through both wired and wireless connections.
The Cisco RV110W provides a Wireless-N access point, combined with support
for Virtual Private Network (VPN) clients to make remote access to your network
more secure.
The router 10/100 Fast Ethernet WAN interface connects directly to your
broadband DSL or Cable modem.