User Manual

Viewing the Cisco RV110W Status
Viewing Connected Devices
Cisco RV110W Administration Guide 145
8
• Warning—System warning occurred.
• Notification—System is functioning properly, but a system notice occurred.
• Informational—Device information.
• Debugging—Provides detailed information about an event.
To delete all entries in the log window, click Clear Logs.
To save all log messages from the firewall to the local hard drive, click Save Logs.
To specify the number of entries to show per page, choose a number from the
drop-down menu.
Use the page navigation buttons to move between log pages.
Viewing Connected Devices
The Connected Devices page displays information about the active devices
connected to the Cisco RV110W.
The IPv4 ARP Table displays information from devices that have responded to the
Cisco RV110W address resolution protocol (ARP) request. If a device does not
respond to the request, it is removed from the list.
The IPv6 NDP Table displays all IPv6 neighbor discover protocol (NDP) devices
connected to the Cisco RV110W local link.
To view connected devices:
STEP 1 Choose Status > Connected Devices.
STEP 2 In the IPv4 ARP Table, you can specify the types of interfaces to display by
selecting an option from the Filter drop-down menu. You can choose one of the
following options:
All Displays a list of all devices connected to the
router.
Wireless Displays a list of all devices connected through the
wireless interface.