Datasheet

© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 4 of 6
Feature Description
Quality of service (QoS)
802.1p port-based priority on LAN port, application-based priority on WAN port
4 queues
Differentiated Services Code Pointsupport (DSCP)
Class of Service (CoS)
Bandwidth Management for service prioritization
Management
Simple Network Management Protocol (SNMP) v3
Event logging: local, syslog, email alerts
Firmware upgradable through web browser
Imported/exported configuration in text format
Simple browser-based configuration (HTTP/HTTPS)
Bonjour and Universal Plug and Play (UPnP)
Network diagnostics: Ping, Traceroute, and DNS Lookup
Performance
NAT throughput: 90 Mbps
Concurrent sessions: 5,000
VPN throughput: 5Mbps
Wireless LAN Specifications
Table 2 gives the wireless specifications for the Cisco RV110W.
Table 2. Wireless LAN Specifications
Feature Description
WLAN hardware IEEE 802.11n standard-based access point with 802.11b/g compatibility
Radio and modulation type:
802.11b: direct sequence spread spectrum (DSSS)
802.11g/n: orthogonal frequency division multiplexing (OFDM)
2 omnidirectional 1.8 dBi gain fixed external antennas
Operating channels:
11 in North America
13 in most of Europe
Automatic channel selection
Transmit power:
802.11b: 17 dBm +/- 1.5 dBm
802.11g: 15 dBm +/- 1.5 dBm
802.11n: 12.5 dBm +/- 1.5 dBm
Receiver sensitivity:
-87 dBm at 11 Mbps
-71 dBm at 54 Mbps
-68 dBm at msc15, HT20 / -66dBm at mcs15, HT40
Wireless Domain Services (WDS)
Allows wireless signals to be repeated by up to 3 compatible devices
Wi-Fi Multimedia (WMM)
WMM with QoS (802.11e), WMM power save (WMM-PS)
Active WLAN clients
Up to 32 clients
Service Set Identifiers (SSIDs)
Up to 4 separate wireless networks
Wireless isolation
Wireless isolation between clients
WLAN security
WPS ( Wi-Fi Protected Setup), Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA)
personal and enterprise, WPA2 personal and enterprise