Datasheet

© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 6
Product Specifications
Table 1 gives the product specifications for the Cisco RV110W.
Table 1. Product Specifications
Feature Description
Routing
Static routing
Dynamic routing
Routing Information Protocol (RIP) v1 and v2
Inter-VLAN routing
Layer 2
802.1Q-based VLANs
4 active VLANs (3 to 4094 range)
Network
Dynamic Host Configuration Protocol (DHCP) server
Point-to-Point Protocol over Ethernet (PPPoE)
Point-to-Point Tunneling Protocol (PPTP)
Layer 2 Tunneling Protocol (L2TP)
DNS proxy
DHCP relay agent
IGMP Proxy and multicast forwarding
Internet Group Management Protocol (IGMP) proxy and multicast forwarding
Rapid Spanning Tree Protocol (RSTP)
Dynamic DNS (DynDNS), TZO, 3322.org)
Network Address Translation (NAT), Port Address Translation (PAT)
Port management
Port Mirroring
Software-configurable network edge (DMZ) to any LAN IP address
IPv6
Dual-stack IPv4 and IPv6
6to4 tunneling
Multicast Listener Discovery (MLD) for IPv6 (RFC 2710)
Stateless address auto-configuration
DHCP v6 Server for IPv6 Clients on LAN
DHCP v6 client for WAN connectivity
Internet Control Message Protocol (ICMP) v6
Static IPv6 Routing
Dynamic IPv6 Routing with RIPng
IPv6 Rapid Deployment
Security
Stateful packet inspection (SPI) firewall
Port forwarding and triggering
Firewall Access Control Lists and Content Filtering
Denial-of-service (DoS) prevention
MAC-based wireless access control
Static URL blocking or keyword blocking
Schedule-based Internet access policy
HTTPS web access to the device manager
Username/password complexity enforcement
Self-signed SSL certificate
Import and export certificate using Privacy-Enhanced Mail (PEM) format
VPN
5 IPsec client sessions using Cisco QuickVPN client
5 PPTP client sessions for remote client access
Triple Data Encryption Standard (3DES) VPN pass-through of PPTP, L2TP, and IPsec
1 IPSec Site-to-Site tunnel