Specifications

Chapter 7 Broadband and Dial Access
7-15
Cisco uBR 3x10 RF Switch
Specifications
For More Information
See the Cisco uBR10012 Web site:
http://www.cisco.com/en/US/products/hw/cable/ps2209/index.html
Cisco uBR 3x10 RF Switch
The Cisco uBR 3x10 RF Switch works with the Cisco uBR10002 and
uBR7246VXR universal broadband routers to provide a fully redundant
CMTS. The Cisco uBR 3x10 RF Switch accommodates three downstream
switch modules and 10 upstream modules.
When to Sell
Key Features
• Hot swap capability that eliminates downtime for RF paths
• Support of DOCSIS, Euro-DOCSIS and PacketCable RF performance specifications
• Most comprehensive set of high availability features
• Modular upstream and downstream capacity
• Fully passive working path
• Active components only in protect path
• Position-sensing latching relays
• Unmatched port density and flexibility
• N+1 redundancy
Feature Cisco uBR10012
Modular Slots
8 slots for cable line cards
4 slots for LAN/WAN interfaces
2 slots for Performance Routing Engines (PREs)
2 slots for Timing Communication and Control Plus (TCC+) modules
Supported Cards
Cable line cards that include Cisco 5X20U BPE
Timing, Communications, and Control Plus (TCC+) card
Gigabit Ethernet (GE) network uplink card and OC-48 DPT Interface
Processor Type
Parallel Express Forwarding (PXF)
Flash Memory
48 MB (default); 128 MB (maximum)
DRAM Memory
512 DRAM (default)
Software Supported
Minimum software requirement: Cisco IOS Software Release 12.2(11)BC1 minimum for the Cisco 5X20
BPE, Cisco IOS Software Release 12.2(13)BC minimum for the Cisco OC-48 DPT Interface, Cisco IOS
Software Release 12.3(9)BC minimum to support DSG and the Cisco PRE-2
Power Supply
DC, AC
Hot-Swappable
Yes
Backplane Capacity
51.2 Gbps
Physical Dimensions
(H x W x D)
Height: 31.25 in. (79.4 cm)—18 rack units (RU)
Width: 17.2 in. (43.7 cm)
Depth: 22.75 in. (57.8)
Mounting: 19 in. rack mountable (front or rear), 2 units per 7 ft. rack
Note: Mounting in 23 in. racks is possible with optional third-party hardware
Weight
Weight: 235 lb (106.6 kg) fully configured chassis
Sell This Product When a Customer Needs These Features
Cisco uBR 3x10 RF
Switch
• Carrier class N+1 network and service architecture
• High density HA service support
• Scalability to tens of thousands of subscribers