Specifications

Chapter 3 Wireless LAN
3-18
Cisco Aironet Antennas and Accessories
Selected Part Numbers and Ordering Information
1
For More Information
See the Cisco Aironet Web site: http://www.cisco.com/go/aironet
Cisco Aironet Antennas and Accessories
Every wireless LAN deployment is different. When engineering an
in-building solution, varying facility sizes, construction materials, and
interior divisions raise transmission and multipath considerations. Cisco
has the widest range of antennas, cable, and accessories available from any wireless
manufacturer. Cisco offers a complete range of 2.4 GHz and 5 GHz antennas for access
point and bridge equipment that enable a customized wireless solution for almost any
installation
Key Features
• Client Adapter Antennas—To extend the transmission range for more specialized
applications, a variety of optional, higher-gain antennas are provided that are
compatible with selected client adapters
• Access Point Antennas—Compatible with all Cisco RP-TNC-equipped access points;
Available with different gain and range capabilities, beam widths, and form factors
• Bridge Antennas—Available in directional configurations for point-to-point
transmission and omnidirectional configuration for point-to-multipoint
implementations
Compliance
Operates license-free under FCC Part 15 and complies as a Class B device; complies with DOC regulations;
complies with ETS 300.328, FTZ 2100, and MPT 1349 standards; complies with UL 2043 (The use of this device in
a system operating either partially or completely outdoors may require the user to obtain a license for the system
according to the Canadian regulations. For further information, contact your local industry Canada office.)
SNMP Compliance
MIB I and MIB II
Antenna
Two RP-TNC connectors (antennas optional, none supplied with unit)
Encryption Key Length
128-bit
Security
128-bit WEP in bridge mode; IEEE 802.11x (includes EAP and RADIUS) in AP mode
Status Indicators
Three indicators on the top panel provide information concerning association status, operation, error/warning,
firmware upgrade, and configuration, network/modem, and radio status
Automatic Configuration
Support
BOOTP and DHCP
Remote Configuration
Support
Telnet, HTTP, FTP, TFTP, and SNMP
Local Configuration
Direct console port (with supplied serial cable)
Bridging Protocol
Spanning Tree
Dimensions
6.74 x 6.25 x 1.31 in. (17.1 x 15.9 x 3.3 cm)
Weight
1.43 lbs (.648 kg)
Environmental
Temperature: -4× to 131× F (-20× to 55× C)
10 to 90% (noncondensing)
Enclosure
Metal case (for plenum rating); UL 2043 certified
Input Power
Requirements
24VDC 10% to 60 VDC (Ethernet line power)
1. Maximum power setting will vary according to individual country regulations
2. Typical and contingent on antenna used
Cisco Aironet 350 Series Wireless Bridge
1
1. This is only a small subset of all parts available via URL listed under “For More Information.” Some parts have restricted
access or are not available through distribution channels.
AIR-BR350-x-K9 350 Series 11Mbps DSSS Bridge with 128-bit WEP
Cisco Aironet 350 Series Wireless Bridge Basic Maintenance
CON-SNT-PKG2 SMARTnet Maintenance for AIR-BR350-A-K9
Feature Cisco Aironet 350 Series Wireless Bridge