Specifications

ManualsBrandsCisco ManualsPrint & ScanRSP2 - Route Switch Processor 2

OL-4923-01 B0

Last, delete the rsp-k-mx11.2 image from the standby RSP, as shown in Figure 11:

Figure 11 Software Error Protection—Backing Up with an Older Software Version, Part III

The following commands configure software error protection for this sample scenario:

Step 1 View the active and the standby slot 0 to verify the location and version of their software images:

Router# dir slot0:

-#- -length- -----date/time------ name

1 3482498 May 4 1999 21:38:04 rsp-k-mx11.2

7993896 bytes available (1496 bytes used)

Router# dir slaveslot0:

-#- -length- -----date/time------ name

1 3482498 May 4 1999 21:38:04 rsp-k-mx11.2

7993896 bytes available (1496 bytes used)

Step 2 Copy the Release 12.1(12)E system image to the active and the standby PC Card slot 0:

Router# copy tftp slot0:rsp-k-mx11.1

Router# copy tftp slaveslotk0:rsp-k-mx11.1

Step 3 Delete the rsp-k-mx11.2 image from the standby RSP:

Router# delete slaveslot0:rsp-k-mx11.2

ENABLE

57293

Standby RSP card

Flash memory

Active RSP card

Flash memory

slot0:rsp-k-mx11.1

slot0:rsp-k-mx11.2

slot0:rsp-k-mx11.1

CONSOLE

AUX

RESET

CPU HALT

SLAVE/MASTER

SLOT 1

NORMAL

SLOT 0

MASTER

SLAVE