Specifications

5-467
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
users
users
Users—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
The users command displays the following information about user sessions that are currently running:
• Access method and port (telnet session to the AXSM, for example)
• Current card slot
• Idle time for the user session (can depend on the sesntimeout command)
• User-name (the login name)
• Point from which the user gained access (for example, an IP address in the case of a telnet session
or the word “console” if the user logged in through a local terminal at the console port)
Note that users shows the current user sessions, whereas the dspusers command shows the names of all
the user accounts on the switch.
Syntax
users
Syntax Description
No Parameters
Related Commands
dspusers, adduser, cnfuser, timeout
Attributes
Example
Display the current users on the AXSM.
MGX8850.10.AXSM.a > users
Port Slot Idle UserId From
-------------------------------------------------------------
telnet.01 10 0:00:00 cisco 0.0.0.0
smterm.03 * 10 0:00:00 davids4 slot 7
Log: no State: active, standby Privilege: ANYUSER