Specifications

5-464
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
upln
upln
Up Line—AXSM, AXSM-E, AXSM-XG, AXSM-32-T1E1-E
The upln command activates a line on an AXSM.
After you have activated the line, use cnfln to configure the line characteristics such as the type of line
(SONET, T3, or E3), line signaling, and so on.
Note See the cnfcdsct description for important planning considerations before you use upln.
Syntax
upln <bay.line>
Syntax Description
Related Commands
dspln, dsplns, cnfln, dnln
Attributes
Example
Activate line 1 in bay 1.
MGX8850.1.AXSM.a > upln 1.1
bay.line Identifies the bay (1 or 2) and the line number. The line number is from 1 to the
highest numbered line on the back card.
Range:
For OC12: 1
For OC3: 1–4
T3, E3: 1–8
Log: yes State: active Privilege: GROUP1