Specifications

5-460
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
upcons
upcons
Up Connections—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Use the upcons command to bring up all connections associated with the specified interface (port), VPI,
and VCI.
Syntax
upcons <ifNum> <vpi> <vci> [-num <num. of conns to up>] [-verbose <1 | 0>]
Syntax Description
Related Commands
dncon, dncons, dspcon, dspcons, upcon
Attributes
Example
Activate all connections associated with port 2, VPI 30, VCI 300.
MGX8850.11.AXSME.a > upcons 2 30 300
Warning : upcons command is not recommended to be used on a production node...
Do you want to proceed (Yes/No)? y
MGX8850.11.AXSME.a >
ifNum The logical port number, in the range from1 through 60
vpi The VPI has the range 0–255 for a UNI or 0–4095 for
a UNI or VNNI.
vci The VCI in the range 1–65535.
-num Number of consecutive connections to bring up.
-verbose (Optional). This keyword enables (1) or disables (0)
verbose mode.
In verbose mode, the system immediately displays the
connection identifier of each connection after the
connection is deleted.
The default is disabled.
Log: yes State: active Privilege: CISCO_GP