Specifications

5-442
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
showsyserr
showsyserr
Show System Errors—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Use the showsyserr command to set the state of the system error function to either ON of OFF.
Note Enter the showSyserr command without parameters to display the current status of the system error
feature (whether it is on or off).
Syntax
showsyserr [on | off]
Syntax Description
Related Commands
None.
Attributes
Example
Show the current status of the showSyserr feature.
M8850_NY.1.AXSM.a > showsyserr
Value of showSyserr is currently OFF
Enable the showSyserr feature.
M8850_NY.1.AXSM.a > showsyserr on
Value of showSyserr is now turned ON
M8850_NY.1.AXSM.a >
on | off Enables and disables the showSyserr feature. Enter on to enable the
showSyserr feature. Enter off to disable the showSyserr feature.
Log: no State: active/standby/init Privilege: ANYUSER