Specifications

5-438
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
setsctver
setsctver
Set SCT Version—AXSM
The setsctver command lets you pre-set a new SCT for an AXSM card. The next time the card is reset,
the switch loads the SCT specified with this command onto the card. You can use this command in
conjunction with a graceful firmware upgrade. A graceful upgrade includes a card reset, and this card
reset causes the SCT version specified by the setsctver command to load onto the card.
The commands for a graceful upgrade are loadrev, runrev, and commitrev. In conjunction with a
graceful upgrade, you use the setsctver command before the loadrev command.
Syntax
setsctver <sctVer>
Syntax Description
Related Commands
delsct, cnfsct, dspscts, addsct, addport, cnfport, dspport, cnfcdsct, dspportsct, dspcdsct, dspsct
Attributes
Example
Set the SCT version to 20. The next time the card is reset, the switch will load SCT 20 onto that card.
M8850_NY.12.AXSM.a > setsctver 20
M8850_NY.12.AXSM.a >
sctVer The number of the SCT has a range of 1–255.
Log: yes State: active Privilege: GROUP1