Specifications

5-435
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
sesntimeout
sesntimeout
Session Timeout—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Use the sesntimeout command to extend the amount of idle time in a user-session from the default of
10 minutes. If you do not specify a timeout period, the system displays the current timeout. At the end
of the session, the system logs you out.
To disable the session timeout function, specify 0 seconds.
Note The timeout command is the same as the sesntimeout command.
Syntax
sesntimeout [timeout]
Syntax Description
Related Commands
None.
Attributes
Example
Set session timeout threshold to 12 minutes (720 seconds).
M8850_NY.1.AXSM.a > sesntimeout 720
The timeout period for this session is now set to 720 second(s)
M8850_NY.1.AXSM.a >
timeout (optional) Number of idle time seconds allowed for the session.The
maximum timeout is 12 hours(43200 seconds). You can enter 43200
or just 0 to set the timeout session to the maximum timeout.
Log: No State: active/standby/init Privilege: ANYUSER