Specifications

2-8
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 2 Preparing AXSM Lines for Communication
General AXSM Provisioning Procedures
Table 2-2 Cisco Provided SCTs for AXSM Cards
Card Type SCT Type
SCT
ID
PNNI MPLS
NotesPolicing
1
AXSM Card
2
2
3
N/A — There is no operational difference between AXSM card
SCTs 2 and 3. Cisco recommends using AXSM card
SCT 4 or 5.
3
3
N/A —
4 N/A N/A There is no operational difference between AXSM card
SCTs 4 and 5.
5N/A N/A
Port 2
3
On — Cisco recommends using AXSM port SCT 4 or 5.
3
3
Off —
4 On Off PNNI policing on.
5 Off Off PNNI policing off.
AXSM-E Card
2
4 N/A N/A All three AXSM-E card SCTs are identical.
5N/A N/A
52 N/A N/A
Port 4 On Off Use for UNI ports on interfaces faster than T1 or E1.
There is no difference between port SCTs 4 and 5.
5On Off
6 Off Off Use for NNI ports on interfaces faster than T1 or E1.
52 On Off Use on AXSM-32-T1-E1-E UNI ports.
53 Off Off Use on AXSM-32-T1-E1-E NNI ports.
54 On Off Optimized for UNI IMA groups that use 4 T1/E1 lines
or less.
4
55 Off Off Optimized for NNI IMA groups that use 4 T1/E1 lines
or less.
4