Specifications

5-410
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspudpdiagcstat
dspudpdiagcstat
Display User Datagram Protocol Diagnostic Connection Statistics—AXSM, AXSM-XG
Use the dspudpdiagcstat command to display the User Datagram Protocol (UDP) diagnostic connection
statistics for the specified interface (port).
Note The dspudpdiagcstat command is an engineering command that is available only when the card is in
engineering mode. To enable engineering mode on the current card, enter the seteng on command.
Syntax
dspudpdiagcstat <ifNo> <vpi> <vci>
Syntax Description
Related Commands
dspudpdiagstat
Attributes
Example
Display the UDP diagnostic connection statistics for port 21, VPI 0, VCI 0.
M8950_DC.1.AXSM.a > dspudpdiagcstat 21 0 0
Ingress:
EOF : 738101
EFCI : 0
Egress:
EOF : 738107
EFCI : 0
M8950_DC.1.AXSM.a >
Log: no State: active, standby Privilege: GROUP1