Specifications

5-403
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspspvcifs
dspspvcifs
Display SPVC Interfaces—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Use the dspspvcifs command to display SPVC address information about all interfaces (ports) on the
current AXSM.
Syntax
dspspvcifs [-start <intf>] [-ctlr <controller>] [-detl <1 | 0>]
Syntax Description
.
Related Commands
dspspvcif
Attributes
Example
Display SPVC address information about all interfaces (ports) on the current AXSM.
M8850_LA.1.AXSM.a > dspspvcifs
*********ALLOCATIONS BY INTERFACE**********
Cumulative connection count : VCs: 0000; VPs: 0000
M8850_LA.1.AXSM.a >
-start
<intf>
Identifies the starting segment in a list of consecutive segments to be displayed.
Enter the -start keyword, followed by the number that identifies the starting
segment. The display will show all consecutive segments, beginning with the
segment number you specify here.
Note Enter the dspspvcifs command without any of the optional parameters to see
the interface numbers for all SPVCs on the current AXSM.
-ctlr
<controller>
Identifies the network controller associated with the interface (port) whose address
information you want to display. Enter the -ctlr keyword, followed by the controller
ID.
Note Enter the dspspvcifs command without any of the optional parameters to see
the controller IDs for all SPVCs on the current AXSM card.
-detl
<1 | 0>
Enables or disables detl on the specified port. Enter the -detl keyword, followed by
1 to enable detl, or 0 to disable detl.
Log: no State: active/standby Privilege: CISCO_GP