Specifications

5-387
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dsprscprtn
dsprscprtn
Display Resource Partition—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Use the dsprscprtn command to display information about a resource partition. The displayed
information is shown in the example.
Note The dsppart and dsprscprtn commands are identical. The name ‘dsprscprtn' is consistent with the
corresponding command in Release 1 of the MGX 8850 switch. You can use either command.
The total number of connections in the display includes control VCs. The types of control VCs are
SSCOP, PNNI-RCC, and ILMI (if ILMI is enabled). To see the connection counts that do not include
control VCs, use dsppnport.
Syntax
dsprscprtn <ifNum> <partId>
Syntax Description
Related Commands
addrscprtn, cnfrscprtn, delrscprtn, dsprscprtns
Attributes
Example
Display the configuration for partition 1 on logical port 11.
M8850_LA.1.AXSM.a > dsprscprtn 11 1
Interface Number : 11
Partition Id : 1 Number of SPVC: 0
Controller Id : 2 Number of SPVP: 0
egr Guaranteed bw(.0001percent): 1000 Number of SVC : 2
egr Maximum bw(.0001percent) : 10000
ing Guaranteed bw(.0001percent): 1000
ing Maximum bw(.0001percent) : 10000
min vpi : 100
max vpi : 200
min vci : 35
ifNum Logical interface (port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
partId Partition identifier, in the range from 1 through 5.
Log: no State: active, standby Privilege: ANYUSER