Specifications

5-380
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspqecnfcnt
dspqecnfcnt
Display QE Configuration Count—AXSM-E, AXSM-32-T1E1-E
This command displays the programmed cell rates in the AXSM-E and AXSM-XG Queuing Engine
(QE) for the specified logical port (ifNum) in the specified direction. This command displays the current
global cell count of the QE, the input and output VI count, and the Qbin levels.
The Qbin is a Class of Service Buffer (CoSB) that supports Quality of Service (QoS). The VI is the service
group virtual interface (port).
This command is a traffic management debugging tool that allows you to compare the programmed cell
rates with the actual cell count at any given time.
Syntax
dspqecnfcnt <direction> <ifNum>
Syntax Description
Related Commands
dspconhwcnf
Attributes
Example
MGX8850.4.AXSME.a > dspqecnfcnt 2 11
Displaying Thresholds configured in EGRESS QE for ifNum# 11
-----------------------------------------------------------------
Global Cell Count : 0
Input VI Count : 0
Output VI Count : 0
QBIN# QBIN Min. Cell Rate QBIN Curr. Cell Count
-----------------------------------------------------------------
1 7 0
2 150 0
3 7 0
4 100 0
direction The direction of the cells.
1: Ingress
2: Egress
ifNum The virtual interface number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
Log: no State: active Privilege: ANYUSER