Specifications

5-376

Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches

Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005

Chapter 5

dspprfhist

Display Profiler History—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG

Use the dspprfhist command to display CPU usage. The information consists of a percent of CPU time

used by individual tasks. The information appears in “buckets” (see Example). You can specify the

maximum number of “CPU utilization information” buckets that are displayed. Each bucket reflects the

overall CPU utilization of the tasks in a five-second polling interval.

Note This command applies primarily to internal Cisco developers.

Syntax

dspprfhist [buckets]

Syntax Description

Related Commands

dspprf, cnfrmrsrc, dsprmalms, dsprmrsrc, dsprmrsrcs, dsprminfo

Attributes

Example

Display the CPU usage history for the current AXSM.

Note The total percent of CPU usage does not necessarily equal 100 because only the three busiest tasks are

displayed.

M8850_LA.1.AXSM.a > dspprfhist

CURRENT TIME 09:39:01

Sample # 0

09:31:47(From)-09:36:47(To)

TASK TaskId %

---------------------------------------

INTERRUPT - 0.0000

KERNEL - 0.0000

IDLE - 98.0000

UNKOWN - 0.0000

tCliIOtimer 30 0.0000

buckets Optional number of buckets to display. If you do not specify the number of

buckets, the command displays a maximum of 10 buckets.

Range: 1-120

Default: 10

Log: no State: active, standby Privilege: ANYUSER