Specifications

2-2
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 2 Preparing AXSM Lines for Communication
Quickstart Provisioning Procedures
For instructions on initializing cards and configuring card and line redundancy, refer to the follow ing guides:
• Cisco MGX 8800/8900 Series Configuration Guide, Release 5.2
• Cisco MGX 8800/8900 Hardware Installation Guide, Releases 2 - 5.2
• Release Notes for Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, and Cisco MGX 8830
Switches, Release 5.2.00
Note The procedures in this guide do not apply to Cisco MGX 8850 (PXM1E), Cisco MGX 8830, or
Cisco MGX 8830/B switches because these switches do not support AXSM cards. On these switches,
ATM communication is supported on the PXM1E, AUSM, and MPSM cards.
Note For the purposes of this guide, the term “AXSM” refers to all types of AXSM cards. In this document,
the term AXSM/A distinguishes the first release of AXSM from AXSM/B, AXSME, and AXSM-XG
cards.
Quickstart Provisioning Procedures
This section includes quickstart procedures for preparing AXSM cards and lines for communications, as
follows:
• Preparing Cards and Lines for Configuration Quickstart
• Channelizing SONET Lines Configuration Quickstart
• Channelizing SDH Lines Configuration Quickstart
AXSM-2-622-E Standalone None
1:1 Intercard and intracard APS
AXSM-4-622
AXSM-4-622/B
AXSM-4-2488-XG
Standalone Intracard APS
1:1 Intercard and intracard APS
AXSM-8-155-E
AXSM-8-622-XG
Standalone Intracard APS
1:1, 1+1 Intercard and intracard APS
AXSM-16-155
AXSM-16-155/B
AXSM-16-155-XG
Standalone Intracard APS
1:1 Intercard and intracard APS
AXSM-16-T3E3
AXSM-16-T3E3/B
AXSM-16-T3E3-E
AXSM-32-T1E1-E
Standalone None
1:1
Table 2-1 Card Redundancy and Line Redundancy Features per AXSM Card (continued)
Card Type Card Redundancy Options Line Redundancy Supported