Specifications

5-364
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspportsct
dspportsct
Display Port SCT—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Displays the contents of the service class template (SCT) on a port. See the description of the addport
command for information on SCTs.
Note Currently, the system does not support certain parameters in the SCT, so you can specify them through
addcon, cnfcon, or Cisco WAN Manager. These parameters are (when applicable) PCR, SCR, and ICR.
Syntax
dspportsct <parameter_group> <ifnum>
Syntax Description
Related Commands
addport, cnfport, delport, dspport
Attributes
Examples
Display the policing and CAC parameters (parameter “gen”) for SCT 2
To confirm that the current card-level SCT is SCT 2, use the dspcd command.
MGX8850.1.AXSM.a > dspportsct gen 2
+-------------------------------------------------------------------------------------------------+
Service Class Template [2] : General Parameters
+-------------------------------------------------------------------------------------------------+
| SERV-TYPE | COSB_NUM | CAC_TYPE | UPC_ENB | CLP-SELEC | GCRA-1 | GCRA-2 | CI-CNTRL |
+-------------------------------------------------------------------------------------------------+
| VSI-SIG | 00000016 | B-CAC |GCRA 1 & 2| 000000002 | DISCARD | DISCARD | DISABLED |
parameter_group An aspect of the SCT for display:
• abr - Available bit rate parameters. (AXSM-E or AXSM-XG only)
• gen - Policing and Connection Admission Control (CAC) parameters.
• cosb - Class of Service Buffer parameters.
• vcThr - Virtual Channel Threshold parameters.
• cosThr - Class of Service Threshold parameters.
ifnum Logical interface (port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
Log: no State: active, standby Privilege: ANYUSER