Specifications

5-363
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspportload
dspportload
Display Port Load—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
The dspportload command displays the current number of ingress and egress cells per second on a
logical port (ifNum). This command can help you determine the current state of a port. Using the
parameters displayed by dspcon, you can see if the current load on the port needs modification or
troubleshooting.
Syntax
dspportload <ifNum> [intvl]
Syntax Description
Related Commands
dspports, dspport, cnfport
Attributes
Example
Display the load on logical port 1 on AXSM. In this case, no traffic currently exists on the connection.
MGX8850.10.AXSM.a > dspportload 1
Getting the stats. Please wait ...
Ingress Egress
Cell rate (cps) : 0 0
Display the load on logical port 1 on AXSM-E.
MGX8850.5.AXSME.a > dspportload 1
Getting the stats. Please wait ...
Ingress Egress
Cell rate (cps) : 0 0
MGX8850.5.AXSME.a >
ifNum The logical interface (or port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
intvl The optional time interval in seconds for which the cell rate will be displayed. The
range is 1–5. The default is 1. For example, if 5 seconds is specified, the average cell
rate for a 5 second interval is displayed.
Log: no State: active, standby Privilege: ANYUSER