Specifications

5-361
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspportdbgcnt
dspportdbgcnt
Display Port Debug Counters—AXSM
Display all port debugging counters on the current AXSM.
Note To enable the port debugging feature, enter the cnfportdbg <ifNum> 1 command. Replace <ifNum> with
the number of the port on which you want to enable the debugging feature.
Syntax
dspportdbgcnt <ifNum>
Syntax Description
Related Commands
cnfportdbg, clrportdbgcnt, dspportdbgcnf
Attributes
Example
Display the port debugging counters for logical interface (or port) 11 on the current AXSM.
M8850_NY.1.AXSM.a > dspportdbgcnt 11
Ingress Egress
Arrival cells cnt[1]: 0 2531
Threshold dscd cnt[1]: 0 0
Programmed dscd cnt[1]: 0 0
Departure cells cnt[1]: 0 2572
Arrival cells cnt[2]: 0 0
Threshold dscd cnt[2]: 0 0
Programmed dscd cnt[2]: 0 0
Departure cells cnt[2]: 0 0
Arrival cells cnt[3]: 0 0
Threshold dscd cnt[3]: 0 0
Programmed dscd cnt[3]: 0 0
Departure cells cnt[3]: 0 0
Arrival cells cnt[4]: 0 0
Threshold dscd cnt[4]: 0 0
Programmed dscd cnt[4]: 0 0
Departure cells cnt[4]: 0 0
Arrival cells cnt[5]: 0 0
Type <CR> to continue, Q<CR> to stop:
ifNum Logical interface (or port) number. The range is from 0 through 60.
Log: no State: active/standby Privilege: SERVICE_GP