Specifications

5-360
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspportdbgcnf
dspportdbgcnf
Display Port Debug Configuration—AXSM
Display all ports on the current AXSM that have the port debugging feature enabled.
Note To enable the port debugging feature, enter the cnfportdbg <ifNum> 1 command. Replace <ifNum> with
the number of the port on which you want to enable the debugging feature.
Syntax
dspportdbgcnf <ifNum>
Syntax Description
Related Commands
cnfportdbg, clrportdbgcnt, dspportdbgcnt
Attributes
Example
Display the ports on current AXSM that have the port debugging feature enabled.
M8850_NY.1.AXSM.a > dspportdbgcnf
The debug stats is enabled for these ports:
11
ifNum Logical interface (or port) number. The range is from 0 through 60.
Log: no State: active/standby Privilege: SERVICE_GP