Specifications

5-354
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspport
dspport
Display Port—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Displays the configuration for a logical port. The displayed information is shown in the example. For a
description of each item, see addport.
Note The operational state for standby cards is reported as N/A because the operational state of the standby
card may not be the same as the active card.
The total number of connections in the display includes control VCs. The types of control VCs are
SSCOP, PNNI-RCC, and ILMI (if ILMI is enabled). To see the connection counts that do not include
control VCs, use dsppnport.
When an AXSM-E or AXSM-XG rebuilds, it provisions the card from the stored database on the PXM
disk. If the SCT file associated with a specific port is missing or corrupted, the default SCT file is applied
to that port. This is indicated in the dspport output by the string:
“!Default SCT used!”
Note The SCT ID that dspport shows pertains to the port. For the card-level SCT ID, use dspcd.
Syntax
dspport <ifNum>
Syntax Description
Related Commands
addport, dnport, dspports
Attributes
ifNum A logical port (interface) number. Only one logical port is allowed if the line operates
as a UNI or NNI. For the virtual network to network interface (VNNI), multiple ports
can exist on a line. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
Log: no State: active, standby Privilege: ANYUSER