Specifications

5-351
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dsppathalmcnt
dsppathalmcnt
Display Path Alarm Counters—AXSM-XG
Displays the path alarm counters for the specified path (path_num) for the current 15-minute interval and
the current 24-hour interval or for a specified 15-minute interval (intvl).
Syntax
dsppathalmcnt <path_num> [<intvl>]
Syntax Description
Related Commands
clrpathalmcnt
Attributes
Example
MGX8950.3.AXSMXG.a > dsppathalmcnt 1.1.1
Path Number : 1.1.1
Path Type : sts
Elapsed Time(in sec): 586
Path PM:
--------
Num of AISs: 0
Num of RDIs: 0
Near End Far End
CurrentESs : 0 CurrentESs : 0
CurrentSESs : 0 CurrentSESs : 0
CurrentCVs : 0 CurrentCVs : 0
CurrentUASs : 0 CurrentUASs : 0
Current24HrESs : 0 Current24HrESs : 0
Current24HrSESs: 0 Current24HrSESs: 0
Current24HrCVs : 0 Current24HrCVs : 0
Current24HrUASs: 0 Current24HrUASs: 0
MGX8950.3.AXSMXG.a > dsppathalmcnt 1.1.1 1
Path Number : 1.1.1
Path Type : sts
Interval Number : 1
path_num Identifies the path whose alarm counters you want to display.
Note If you do not know the path_num, enter the dsppaths command to see a list
of all path numbers on the current card.
intvl The time interval to display (0–96). 0 is the current 15-minute and 24-hour interval. 1
is the most recent 15-minute interval. 2 is the next most recent 15-minute interval,
and so on. 96 being the oldest 15-minute interval.
Log: no State: active, standby, init Privilege: ANYUSER