Specifications

5-350
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dsppathalmcnf
dsppathalmcnf
Display Path Alarm Configuration—AXSM-XG
Displays the configured threshold settings for the statistical alarm counters for the specified path
(path_num).
Syntax
dsppathalmcnf <path_num>
Syntax Description
Related Commands
cnfpathalm
Attributes
Example
MGX8950.3.AXSMXG.a > dsppathalmcnf 1.1.1
PathNum: 1.1.1
PathType : sts
Path Stat Alarm Severity: None
15min Threshold 24hr Threshold
Path ESs : 20 200
Path SESs: 3 7
Path CVs : 25 250
Path UASs: 10 10
NODE.3.AXSMXG.a > dsppathalmcnf 1.4.1.1
PathNum: 1.4.1.1
PathType : ds3
Path Stat Alarm Severity: None
15min Threshold 24hr Threshold
Path ESs : 20 200
Path SESs: 3 7
Path CVs : 25 250
Path UASs: 10 10
path_num Identifies the path whose statistical alarm counter threshold settings you want to
display.
Note If you do not know the path_num, enter the dsppaths command to see a list
of all path numbers on the current card.
Log: no State: active, standby, init Privilege: ANYUSER