Specifications

5-349
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dsppathalm
dsppathalm
Display Path Alarm—AXSM-XG
Displays the following alarm information for the specified path (path_num).
• Path Number
• Path Type
• Path Alarm State
• Path Stat Alarm State
• Path Operational State
• Path LOCD Alarm State
Syntax
dsppathalm <path_num>
Syntax Description
Related Commands
dsppathalms
Attributes
Example
MGX8950.3.AXSMXG.a > dsppathalm 1.1.1
Path Number : 1.1.1
Path Type : sts
Path Alarm State : Clear
Path Stat Alarm State : Clear
Path Operational State: Up
Path LOCD alarm state : LOCD
MGX8950.3.AXSMXG.a > dsppathalm 1.1.2
Path Number : 1.1.2
Path Type : sts
Path Alarm State : Clear
Path Stat Alarm State :
TotalESs,TotalSESs,TotalCVs,TotalUASs,CurrentESs,CurrentSESs,CurrentCVs,CurrentUASs
Path Operational State: Up
Path LOCD alarm state : Clear
path_num Identifies the path whose alarm information you want to display.
Note If you do not know the path_num, enter the dsppaths command to see a list
of all path numbers on the current card.
Log: no State: active, standby, init Privilege: ANYUSER