Specifications

5-344
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspparts
dspparts
Display Resource Partitions—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Display information for all the resource partitions on the current card. The displayed information is
shown in the example.
For information on specific elements of a resource partition, see the description of addpart.
Note The dspparts and dsprscprtns commands are identical. The name “dsprscprtns” is consistent with the
corresponding command in Cisco MGX 8850 PXM1-based switch. You can use either command.
Syntax
dspparts
Related Commands
addpart, delpart, cnfpart, dsppart
Attributes
Example
Display all resource partitions on the current AXSM card.
MGX8850.1.AXSM.a > dspparts
if part Ctlr egr egr ingr ingr min max min max min max
Num ID ID GuarBw MaxBw GuarBw MaxBw vpi vpi vci vci conn conn
(.0001%)(.0001%)(.0001%)(.0001%)
-----------------------------------------------------------------------------
1 1 2 1000000 1000000 1000000 1000000 0 4095 33 65535 1000 32000
2 1 2 1000000 1000000 1000000 1000000 0 255 33 65535 1000 32000
20 1 2 1000000 1000000 1000000 1000000 1 1 33 65535 2 512
21 1 2 1000000 1000000 1000000 1000000 0 255 33 65535 2 512
22 1 2 1000000 1000000 1000000 1000000 0 255 33 65535 2 512
23 1 2 1000000 1000000 1000000 1000000 255 255 33 65535 2 512
Display all resource partitions on the current AXSM-E card.
MGX8850.1.10.AXSME.a > dspparts
if part Ctlr egr egr ingr ingr min max min max min max
Num ID ID GuarBw MaxBw GuarBw MaxBw vpi vpi vci vci conn conn
(.0001%)(.0001%)(.0001%)(.0001%)
-----------------------------------------------------------------------------
1 1 1 100 1000 100 100 1 2 32 33 10 100
Log: no State: active, standby Privilege: ANYUSER