Specifications

1-14
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 1 Introduction
List of Commands by Function
clrchandbg Clear channelized debugging 5-62
clrchandbgcnt Clear all channelized debugging counters 5-63
clrcosbdbgcnt Clear COSB (class of service buffer) debugging
counters
5-64
clrfdrstat Clear feeder statistics 5-67
cnfabr Configure available bit rate 5-93
cnfcon Configure connection 5-123
copychans Copy one or more channels from a single
connection
5-160
copycons Copy one or more connection endpoints from a
single endpoint
5-162
delallcon Delete all connections 5-168
delchanloop Delete channel loopback 5-170
delcon Delete connection 5-171
delcons Delete connections 5-172
delfdr Delete feeder connection 5-173
dncon Down connection 5-183
dncons Down connections 5-184
dspchancnt Display channel count 5-240
dspchandbgcnf Display channelized debugging configuration 5-244
dspchandbgcnt Display channelized debugging counters 5-245
dspchanloop Display channel loopback 5-246
dspchantests Display channel tests 5-247
dspcon Display connection 5-249
dspconalarms Display connection alarms 5-252
dspcons Display Connections 5-262
dspconalmcnts Display Configuration Alarm Counts 5-253
dspconalms Display Configuration Alarm 5-254
dspconhwcnf Display Connection Hardware Configuration 5-255
dspconload Display Connection Load 5-260
dspCproCnfg Display connection programming configuration 5-269
dspcprotbls Display connection programming tables 5-270
dspfdr Display feeder connection 5-276
dspfdrs Display feeder connections 5-277
dspfdrstat Display feeder statistics 5-278
dspmcastload Display multicast load 5-335
dspsegment Display segment 5-395
Table 1-4 AXSM Command List by Function (continued)
Command Description Page